You don’t need to ask too many people to know that pressure washers are some of the most efficient machines to exist. Pressure washers are the go-to machine if you want an easy way to clean a surface.
Like any other equipment, they also have parts that should work in sync for the pressure washer to work efficiently. Of these parts is the turbo nozzle. Unfortunately, it is common to have issues where the pressure washer turbo nozzle won’t spin.
If that happens, then it only means one thing: there is a problem with the nozzle. How do you fix the issue, though? If you use your pressure washer regularly, then you’ll need to get a solution fast.
Read on to find out what to do.
Contents
Pressure Washer Nozzle Not Working: What Could Be the Issue?
1. Clogging from Dirt
The likeliest reason a pressure washer nozzle isn’t working is because of clogging or dirt that might be inside it. The turbo nozzle is the preferred nozzle for heavy cleaning, so it is normal for it to get clogged time after time.
Therefore, any obstacle in the water will make the turbo nozzle stop spinning. So how do you fix that and have your nozzle spinning again?
To have it spinning again, you’ll have to unclog it. Both the regular and turbo nozzles get dirty after periods of use, even if you clean with clean water. Here is how to clear a turbo nozzle of dirt and other debris.
Unclogging a Turbo Nozzle
All you will need to unclog a turbo nozzle is a wire and water.
Step 1
Take apart the spray wand to get access to the nozzles.
Step 2
Use the wire and gently poke inside the turbo nozzle in a repeated motion.
Step 3
Now pass water through the nozzle. If dirt is the problem, you will see it flushed out with water.
Step 4
Repeat the entire process to ensure you remove all the dirt that might cause problems. While at it, you should also check the other nozzles for clogging and clean them.
You need to ensure you frequently clean your turbo nozzle to prevent obstacles from gathering inside. Any obstacle will make the nozzle stop spinning and interfere with your cleaning.
2. Internal Damage
Clogging isn’t the only reason a turbo nozzle would stop spinning. There are times you might do everything right but still end up with a turbo nozzle that just won’t turn. If that’s happening, then it means there is some damage inside.
Damage inside the nozzle will make it stop spinning and impede your cleaning. The most common reason for the damage is if the nozzle falls or you accidentally drop it. The force would make the internal parts of the nozzle sustain damage.
That’s, however, not common with all the turbo nozzles since plastic nozzles would be more resistant to such damage. If you have a ceramic turbo nozzle, it would be best to avoid dropping it.
Sometimes small actions like a child stepping on the turbo nozzle would also damage it. The nozzle would therefore stop spinning, and you would be left with a problem on your hands.
In case the turbo nozzle stops working from this issue, you will have to get a replacement. There is no fix for such damage hence the reason you will need to get another turbo nozzle.
3. Wear and Tear
It isn’t all the time when a nozzle stops spinning that it’s your fault. Sometimes it could be because you have owned the pressure washer for long and the turbo nozzle has worn down.
If you’ve used one turbo nozzle for a long time and notice it isn’t spinning, check it to ensure it isn’t any of the above issues. If it is old and worn out, it will be best to replace it.
Read Also: Top 10 Best Pressure Washer Soap
What are Other Common Turbo Nozzle Problems?
A lack of spin isn’t the only thing that would make a high-pressure turbo nozzle not work. There are other issues independent of things like clogs in the nozzle or damage.
1. Low Water Pressure
One of the primary reasons pressure washers are efficient is that they shoot out water at extremely high pressure. The pressure makes it possible to remove all kinds of dirt from surfaces.
There are, however, times when the turbo nozzle might give off a low pressure. Low pressure isn’t of much help if you want to clean faster and more efficiently. What would make a turbo nozzle behave that way is if its inlets are dirty.
Dirty inlets have issues passing water at high pressure. You can solve this by frequently cleaning the inlet valve.
Another reason for the low water pressure is if you have a mismatched turbo nozzle. Pressure washers are quite specific and need the perfect parts to function. Therefore, the wrong turbo nozzle attachment would make the water come out at low pressure.
Always check to ensure you have the proper turbo nozzle for your pressure washer.
2. The Turbo Nozzle Doesn’t Spray Water
Although rare, this can be an issue to expect with most pressure washers. When this happens, you will need to check everything to ensure it isn’t the turbo nozzle acting up.
It could be the pressure washer with a problem. To check this, remove the nozzle from the machine and attach another nozzle. Try to spray water through the nozzle and check if it works or not.
If water passes through, then it’s the turbo nozzle that had a problem. If you don’t see any water sprayed despite changing the nozzle, then it will mean the pressure washer has a problem.
Calling in an expert to check it will help you understand the problem and how you can sort it.
How Regularly Should You Unclog Your Pressure Washer Nozzles?
There are no doubt clogged nozzles will slow you down when cleaning. The turbo nozzle might refuse to cooperate by not spinning, and the other nozzles might refuse to pass any water.
That’s why you need to clean or unclog the nozzles frequently. This depends on the type of water you used to clean. If you use water with lots of debris, you will have to be unclogging the nozzles regularly.
One week should be ideal for that. That varies with the timings of clogging, though. The point here is that you need to unclog the nozzles regularly if you want high performance from your pressure washer.
Read Also: How to Build a Soft Wash System
Last update on 2024-11-13 / Affiliate links / Images from Amazon Product Advertising API
The pressure washer turbo nozzle won’t spin due to the bearings inside the motor spinning too quickly. This causes friction, which causes heat, which causes the bearings to break down.
FAQs About pressure washer turbo nozzle
What is the ideal time interval between unclogging pressure washer nozzles?
Depending on usage, the interval could be anything between a week and a fortnight.
Can you fix a damaged turbo nozzle?
Unfortunately, no. You will need a replacement. A turbo nozzle can be repaired if the damage is not too great, but it is usually recommended to replace the damaged nozzle.
Is disassembling a pressure washer difficult?
Unless you know what you are doing, it would be a good idea to avoid disassembling your pressure washer. That should be an expert’s forte.
Do turbo nozzles wear out?
The turbo nozzles do not wear out, but the screens or blades can break off, which will result in decreased airflow, leading to a reduction in power.
How can you confirm compatibility with your pressure washer?
If you want to confirm compatibility between your pressure washer and an appliance, such as a dishwasher, check for the following: – Is the voltage compatible? – Is the water pressure compatible? – Does the power cord offer sufficient electrical service? – How does the appliance connect to the water source and how is it drained?
What is a power washer turbo nozzle?
A power washer turbo nozzle is a tool used to clean with water. It has an aerator or pump that creates a pressurized stream of water. The turbine wand is the part of the tool that is operated by the power washer’s engine, which directs the flow of water. The nozzle typically attaches to the end of the turbine wand and can be adjusted for various spray patterns.
How do you fit a turbo nozzle?
The fitting of a turbo nozzle is a difficult task. It requires a lot of precision and strength to line up the turbo nozzle so that it fits the turbine housing without any air leaks. The best way to accomplish this is by using a sizing ring which is a type of tool that precisely measures the dimension of the turbine housing and turns it into an easy-to-read number for selection purposes.
How do you take apart a pressure washer nozzle?
The nozzle can be taken off and replaced with a different one, so there is a need to understand how to take it apart. To take it apart, use an Allen wrench to unscrew the retaining nut from the back of the nozzle head. This will remove the head from its threading. After that, loosen the bolt holding the inner nozzle together with a Phillips screwdriver.
Final Thoughts
We hope now you know what to do when the pressure washer turbo nozzle won’t spin. Try the solutions we have given you, and it will surprise you how effective they will be. A pressure washer turbo nozzle should turn as it sprays water on a surface, but what do you do if your nozzle won’t spin? This article will show you how to fix a pressure washer that has a turbo nozzle that won’t spin.
Relevant Resources:
