Can You Vacuum Water – Things You Must Know

Updated:

Can You Vacuum Water

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

Have you ever asked yourself whether it’s possible to vacuum water? We know their principal use is to collect dust and dirt, but can you vacuum water as well? Supposing you tip over a cup of coffee, do you continue cleaning, or do you stop?

That’s something many people grapple with when using vacuums. We don’t dispute the fact that vacuums are quite versatile, and you can use them to clean all manner of dirt and debris. But again, you need to know if you can use them to clear watery messes.

If that question has been bugging your mind, then allow us to answer it for you.

Is It Possible to Vacuum Water?

The answer to this is simple. It depends on the type of vacuum. A regular vacuum will electrocute you if you try to vacuum water with it. You might even end up damaging it. Vacuums are electronic equipment, and any contact with water might prove disastrous because of deficiencies in the design.

On the other hand, a wet or dry vac would quickly clear up a watery mess. That’s because the wet/dry vac can clean up both soggy messes and the regular dirt on floors. So, if you want to vacuum water, your best bet would be a wet/dry vac in the mould of a Craftsman.

Yes, you can vacuum water. In fact, it’s a great way to clean up liquid spills. If you have a wet/dry vacuum, just place the vacuum cleaner over the spill and turn it on. The suction will pull the water up into the vacuum cleaner. You can then dump out the water in the trash or outside.

What Happens if You Vacuum Water?

What Happens if You Vacuum Water?

It’s essential to see this from two perspectives. When you vacuum water with a regular vacuum and when you use a dry or wet vac.

A regular vacuum will either short circuit and electrocute you or stop working altogether. That’s because water has a detrimental effect on the inner parts of the vacuum. The vacuum has wires that transmit the electric power to the parts of the vacuum for it to work.

The water won’t even get to the dust bag before the vacuum breaks down and stops working. It is a horrible idea to vacuum water with a regular vacuum, and you should never try it.

Now to the wet/dry vac. A wet/dry vac can and will clean watery messes. That’s what makes it one of the most popular vacuum options. It adds to its versatility to deal with finer dust and small dirt particles typical of garages.

Therefore, a wet/dry vac will gobble up the water on the surface and clean it with relative ease. The wet/dry vac doesn’t have the usual dust bag like you would find in a regular vacuum. Instead, it has a dual bucket system that’s capable of separating liquid and solid water.

Therefore, when you vacuum water, the vacuum will sort the liquid into the liquid dirt bucket and direct the other dirt to the other bucket. Impressive, isn’t it?

Kalorik Water Filtration Canister Vacuum Cleaner
  • Traps all dust and dirt particles in water
  • No bags or dusty containers to empty
  • For wet or dry vacuuming

Last update on 2024-11-15 / Affiliate links / Images from Amazon Product Advertising API

Read Also: Top 5 Best Shop Vac for Drywall Dust

Will Water Ruin a Vacuum?

It’s no secret that water and electricity don’t mix. So, the question is, will water ruin a vacuum? The answer is yes, it can. If enough water gets into the vacuum cleaner, it can cause the electrical components to short out. This can result in the machine catching on fire or even exploding. So, it’s important to keep liquids away from vacuum cleaners, especially if they are electric-powered.

No, water will not ruin a vacuum. In fact, a vacuum can be very useful for cleaning up liquid spills. A vacuum cleaner can be used to suck up the water and then the water can be disposed of in a sink or toilet.

In general, Water will not ruin a vacuum cleaner. The water might cause some minor damage to the vacuum cleaner’s electric parts, but it will not ruin the vacuum cleaner.

Can You Vacuum Water with Dyson?

Dyson is a big brand making some of the best vacuums on the market. But as impressive as its range of vacuums is, can they vacuum water? No, they can’t. Dyson vacuums are just regular vacuums like any other and will suffer damage if you use them to clean up a liquid mess.

What Would Happen If You Vacuum Water with Dyson?

The water would short the vacuum’s fan, get to the filters and damage them and possibly electrocute you. Also, the water will travel up the vacuum tubes and clog them, making consequent cleaning sessions challenging for the vacuum.

Those aren’t pleasant outcomes. But there’s more. Using your Dyson to vacuum water can and will also void its warranty. That means after you damage it and request Dyson for compensation or free repair, you won’t get it.

Can You Vacuum Water Out of the Carpet?

Liquid messes on carpets are a common sight in many homes. It could be coffee, tea, or the occasional tipping over of a cup of water. Either way, a regular vacuum won’t be of much help to you.

However, a wet/dry vac will help you clean the moist mess relatively easily.

Last update on 2024-11-13 / Affiliate links / Images from Amazon Product Advertising API

What To Do If You Vacuum Up Water

Still, there are times you might accidentally vacuum water and might be beside yourself with worry. While you might have enough reason to worry, it could be only a minor issue depending on the amount of water you have vacuumed.

So, what do you do if that happens?

The first thing you should do immediately after you notice that you have vacuumed water is to unplug the appliance from the power source. That ensures the water doesn’t go through the tubes of the vacuum and to the inner parts. That will then save you from any potential accidents.

After unplugging it, you will want to leave the vacuum off for some time to dry before taking it to the repair shop.  Alternatively, you can leave it to dry for about a week before trying to rerun it and check it works fine. 

Also, remember to consult the manual to see if there are any directions if you accidentally vacuum water. If it were only a tiny amount of water, then the dust in the vacuum would suck it up. It, therefore, wouldn’t get to the motor and cause further issues. 

But if it’s a lot of water, then you need to get the vacuum to a qualified repair person as soon as you can. If you fancy your electrical skills, you could open it up and check if it is working okay. Otherwise, always ensure you get it to a proper professional. 

FAQ About How to Vacuum Water

FAQ About How to Vacuum Water

Are There Vacuum Cleaners That Specifically Clean Liquid Messes?

The closest to this is the wet/dry vac that can clean both regular dirt and water. That’s thanks to the unique dual dirtbags it has. Otherwise, a regular vacuum is only fit for you to clean nonliquid messes.

Can You Vacuum Water With a Wet/Dry Vac?

Why not? You can use a wet/dry vac to vacuum water. Although primarily used in industrial setups, you can also use them at home if you are prone to making liquid messes. They don’t cost that much and are a popular option for most people with garages or shops.

How Do I Use My Wet Dry Vac for Water?

There are a few things you need to do in order to use your wet dry vac for water. First, make sure that the vac is turned off and unplugged. Next, remove the dust collection bag (if there is one) and empty it out. Once you have done that, fill the tank with water until it is about two-thirds full. Finally, plug in the vac and turn it on. The water will be sucked into the tank.

Can You Vacuum Water at a Car Wash?

Theoretically speaking, it is possible to vacuum water at a car wash. This is because the car wash likely has a high-powered vacuum system that can remove both dirt and water from a vehicle. In practice, however, it is likely not possible to vacuum water at a car wash because the vacuum system may not be powerful enough to remove all of the water from a vehicle.

Can You Vacuum Water With the Hose?

It is possible to vacuum water with a hose if the water is in a contained area, like a pool or a bathtub. If the water is spread out over a large surface area, like a flooded room, it will be more difficult to vacuum up because the suction from the vacuum cleaner will not be able to overcome the resistance of the water.

Final Thoughts

Can you vacuum water? With a regular vacuum, no. But with a wet/dry vac, then yes. It is a bad idea to vacuum water with a regular vacuum as you risk your safety and that of your family members.

Not even a regular Dyson vacuum can vacuum water. Therefore, it is best if you avoid using it to clean water off your floors. Use the mop instead.

Relevant Resources:

  1. Top 9 Best Vacuum For Luxury Vinyl Plank Floors
  2. 11 Best Vacuum for Concrete Floors
  3. Best Vacuums Without Beater Bar
  4. Top 7 Best Vacuum For House Cleaning Business
  5. 7 Best Vacuum With Retractable Cord
  6. Top 11 Best Lightweight Vacuum Cleaner for Elderly
  7. Top 5 Best Central Vacuum System for Pet Hair
  8. Top 9 Best Vacuum for Fleas Reviews & Buying Guides
  9. 5 Best Walk Behind Leaf Vacuum Mulcher
  10. Top 7 Best Commercial Leaf Vacuum Reviews
  11. 7 Best Cordless Backpack Vacuum Cleaner
  12. Top 7 Best Garage Vacuum Wall Mounted

Latest Posts

  • How to Remove Eggshell Paint from Clothes

    How to Remove Eggshell Paint from Clothes

    Are you tired of staring at that unsightly eggshell paint stain on your favorite shirt? Don’t worry! In this comprehensive guide, we’ll walk you through effective methods to remove eggshell paint from clothes. With a little know-how and some common household items, you’ll be able to say goodbye to those stubborn stains and restore your…

    Read more

  • How to Remove Solvent Cement from Clothes: A Comprehensive Guide

    How to Remove Solvent Cement from Clothes: A Comprehensive Guide

    This comprehensive guide covers 5 effective methods on how to remove solvent cement stains from clothes. Learn how to safely treat stains on various fabrics.

    Read more

  • How to Remove Fiberglass from Clothes: A Complete Guide

    How to Remove Fiberglass from Clothes: A Complete Guide

    Have you ever found yourself in a situation where you accidentally brushed against a fiberglass surface, only to discover later that your clothes were covered in those pesky fibers? Fiberglass can be quite stubborn and cling to fabrics, making it challenging to remove. Davis Instruments – 790 FSR Fiberglass Stain Remover (16-Ounce) STAR BRITE Ultimate…

    Read more